Answer
Feb 03, 2026 - 06:31 AM
A wheel labeled MR703 17×8.5 0 mm offset can fit a 2019 Ford F-150 — but only if the bolt pattern and load rating match your truck and clearance is checked for suspension/brake components.
Here’s how to confirm fitment:
1. Wheel Size & Offset
-
17×8.5: This width is a common wheel size for F-150s and usually clears brake calipers and suspension parts.
-
0 mm Offset: This means the wheel’s mounting surface sits roughly centered in the wheel width, which pushes the wheel out slightly compared to OEM. Many F-150 owners run zero or slightly negative offsets for a wider stance. It can work, but you should check fender clearance and tire size compatibility.
2. Bolt Pattern
Your 2019 Ford F-150 uses a 6×135 mm bolt pattern.
To fit this wheel, it must also be 6×135 mm.
If the MR703 wheel has a different bolt pattern, it will not fit without adapters.
You’ll want to check that the MR703 wheel’s bolt pattern is one of these Ford-compatible patterns:
-
6×135 mm
-
Or, if 6×5.5″ (which is the same — 6×139.7 mm is not a match, so avoid that)
What to Confirm on the Wheel Specs
Before final confirmation, make sure the wheel has:
✔ Bolt pattern: 6×135 mm
✔ Center bore that matches or can be hub-centric adapted to F-150
✔ Load rating suitable for a full-size truck
Source: mytruckpoint.ca
