{"product_id":"bds2100fs-bds-suspension-2014-2018-ram-2500-4wd-6in-radius-arm-suspension-lift-kit","title":"BDS Suspension BDS2100FS - 2014-2018 Ram 2500 4wd| 6in. Radius Arm Lift Kit","description":"\u003cp\u003eTo optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cp\u003eTake your 2014-2018 RAM 2500 diesel powered truck to the next level with a 6-inch lift kit with radius arm by BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, bump stops, brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/p\u003e\n\u003cp\u003eAt this height, the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes progressive rate Pro-Ride coil springs, track bar relocation bracket to correct axle positioning, bump stop extensions, sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003eHD Radius Arms\u003c\/h2\u003e\n\u003cp\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cdiv class=\"feature_benefits_panel\"\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy duty tubular radius arms improve strength, handling and caster control\u003c\/li\u003e\n\u003cli\u003eHigh strength progressive rate coil springs for a great ride on any terrain\u003c\/li\u003e\n\u003cli\u003eTrack bar relocation brackets to re-position axle\u003c\/li\u003e\n\u003cli\u003eForged drop pitman arm to correct steering angles\u003c\/li\u003e\n\u003cli\u003eFront sway bar correction to maintain handling performance\u003c\/li\u003e\n\u003cli\u003eHD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts\u003c\/li\u003e\n\u003cli\u003eBDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"max_tire_panel\"\u003e\n\u003cp class=\"title\"\u003e\u003cstrong\u003eRecommended Tires \u0026amp; Wheels\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"trimming_note\"\u003e(Trimming may be required)\u003c\/p\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cul\u003e\n\u003cli\u003e37 x 12.5 with 17 x 8 and 5.625 in. Backspace\u003c\/li\u003e\n\u003cli\u003e37 x 12.5 with 18 x 9 and 4.5 in. Backspace\u003c\/li\u003e\n\u003cli\u003e35 x 12.5 with 17 x 9 and 4.5 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003eFront Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eRear Lift Method : Coil Spring\u003c\/li\u003e\n\u003cli\u003eShocks Included : Yes\u003c\/li\u003e\n\u003cli\u003eFront Lift Height : 6\"\u003c\/li\u003e\n\u003cli\u003eRear Lift Height : 4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"tab_installation_item_container\"\u003e\n\u003ch3\u003eEst. Install Time :\u003c\/h3\u003e\n3 hrs\u003c\/div\u003e\n\u003cdiv class=\"tab_installation_item_container\"\u003e\n\u003ch3\u003eDifficulty Level :\u003c\/h3\u003e\nModerate\u003c\/div\u003e\n\u003cdiv class=\"tab_installation_item_container\"\u003e\n\u003ch3\u003eSpecialty Tools Needed :\u003c\/h3\u003e\nDrill \/ Bit Set, Pitman Arm Puller, Welding Equipment\u003c\/div\u003e\n\u003cdiv class=\"tab_installation_item_container\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"tab_installation_item_container\"\u003eKit Component \u003c\/div\u003e\n\u003cdiv class=\"tab_installation_item_container\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"tab_installation_item_container\"\u003e1    BDS012458    2014-2018 Ram 2500 4.5\" Rear Coil Box Kit    \u003cbr\u003e1    BDS122321    2013-2024 Ram 2500 \/2013-2024 Ram 3500 Radius Arm Box Kit    \u003cbr\u003e1    BDS012615    2013-2018 Ram 2500\/3500 4wd 6\" Radius Arm Front Box Kit    \u003cbr\u003e1    BDS032602    2013-2024 Ram 3500 \/ 2014-2024 Ram 2500 6\" Coils - Diesel    \u003cbr\u003e1    BDS122623    2013-2018 3500\/2014-2018 2500 Ram T-Case Index- 6 Bolt    \u003cbr\u003e2    FOX98224752    Fox 2.0 Shock 28.25 x 17.15 x 2- S50\/EB1    \u003cbr\u003e2    FOX98224756    Fox 2.0 Shock - 27.95 x 17.35 x 2- Special\/EB1\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003e2014-2018 Ram 2500 4wd| 6in. Radius Arm Suspension Lift Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003e2014-2018 Ram 2500 4wd| 6in. Radius Arm Suspension Lift Kit| 4in. rear spring lift - Diesel engine with Coil spring rear shocks - Fox 2.0 Performance Series Shocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHeavy duty tubular radius arms improve strength handling and caster control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHigh strength progressive rate coil springs for a great ride on any terrain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eTrack bar relocation brackets to re-position axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eForged drop pitman arm to correct steering angles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFront sway bar correction to maintain handling performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eTake your 2014-2018 RAM 2500 diesel powered truck to the next level with a 6-inch lift kit with radius arm by BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 37\" tires.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eUp front the lift kit includes diesel-specific Pro-Ride coil springs heavy-duty replacement radius arms forged drop pitman arm and track bar bracket for steering correction bump stops brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eAt this height the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes progressive rate Pro-Ride coil springs track bar relocation bracket to correct axle positioning bump stop extensions sway bar links and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eHD Radius Arms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eIn place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth quiet service-free operation.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003ePro-Ride Coil Springs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eA pair of full-length diesel-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eSteering Correction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eTo optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eSuspension lift kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eSuspension Lift Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":45532493840669,"sku":"BLDV_BDS2100FS","price":4115.8,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/2771\/7661\/products\/bds_ram_2100FS_2101FS.jpg?v=1757437344","url":"https:\/\/www.mytruckpoint.ca\/products\/bds2100fs-bds-suspension-2014-2018-ram-2500-4wd-6in-radius-arm-suspension-lift-kit","provider":"TruckPoint: Truck Accessories - Car Parts - Canadian Auto Parts","version":"1.0","type":"link"}