{"product_id":"bds215h-bds-suspension-94-99-dodge-3-4-ton-4-5-4-5-spring-kit","title":"BDS Suspension BDS215H - 94-99 Dodge 3\/4 ton 4.5\/4.5 spring Kit","description":"\u003cp\u003eTo optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/p\u003e\n\u003cp\u003eImprove the ride and style of your 1994-1999 Dodge RAM 2500 and 3500 4WD truck with this 4.5-inch lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 35\" tires. BDS engineered new lower control arms that are longer than stock to rotate the axle for proper alignment and built a relocation mounting bracket to flatten out the angle of the upper control arm to maintain your factory handling characteristics.\u003c\/p\u003e\n\u003cp\u003eUp front the lift kit includes Pro-Ride coil springs, all four control arms plus relocation bracket, forged drop pitman arm and track bar bracket for steering correction, bump stops, sway bar drop brackets, and precision tuned NX2 or FOX 2.0 nitrogen charged shocks. In the rear this kit utilizes heavy duty cast steel block and add-a-leaf combo, longer u-bolts, and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/p\u003e\n\u003ch2\u003ePro-Ride Coil Springs\u003c\/h2\u003e\n\u003cp\u003eA pair of full-length, diesel-specific, progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains. Manufactured from high tensile steel, our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/p\u003e\n\u003ch2\u003eSteering Correction\u003c\/h2\u003e\n\u003cp\u003eTo optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while\u003c\/p\u003e\n\u003cdiv class=\"feature_benefits_panel\"\u003e\n\u003cp class=\"title\"\u003eFeatures \u0026amp; Benefits\u003c\/p\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cul\u003e\n\u003cli\u003eTubular short arms improve strength, handling and caster control\u003c\/li\u003e\n\u003cli\u003eHeavy duty control arm brackets maintain proper suspension geometry\u003c\/li\u003e\n\u003cli\u003eFront high strength progressive rate coil springs for a great ride on any terrain\u003c\/li\u003e\n\u003cli\u003eFront track bar relocation bracket to re-position axle\u003c\/li\u003e\n\u003cli\u003eForged drop pitman arm to correct steering angles\u003c\/li\u003e\n\u003cli\u003eFront sway bar correction to maintain handling performance\u003c\/li\u003e\n\u003cli\u003eBDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"max_tire_panel\"\u003e\n\u003cp class=\"title\"\u003eRecommended Tires \u0026amp; Wheels\u003c\/p\u003e\n\u003cp class=\"trimming_note\"\u003e(Trimming may be required)\u003c\/p\u003e\n\u003cdiv class=\"content\"\u003e\n\u003cul\u003e\n\u003cli\u003e35 x 12.5 with 16 x 8 and 4 in. Backspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRear Lift Option\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eBlock Kit\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDetermine if your truck was manufactured with or without top-mounted overload springs on the rear leaf springs. \u003c\/li\u003e\n\u003cli\u003eBlocks made of steel for high strength.\u003c\/li\u003e\n\u003cli\u003eDesigned to provide correct pinion angles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eLeaf Springs\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEliminates any need for a lift block.\u003c\/li\u003e\n\u003cli\u003eReduces axle wrap and creates a more controlled and stable feel.\u003c\/li\u003e\n\u003cli\u003eMulti-leaf progressive design for a smooth ride.\u003c\/li\u003e\n\u003cli\u003eMaintains factory payload weight ratings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eShock Option\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4\u003e\u003cstrong\u003eNX2 Nitro Series\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNitrogen-charged\u003c\/li\u003e\n\u003cli\u003eTwin-tube design\u003c\/li\u003e\n\u003cli\u003e10-stage velocity-sensitive valving\u003c\/li\u003e\n\u003cli\u003eDual-welded ends for increased strength\u003c\/li\u003e\n\u003cli\u003e1-3\/8-inch high-flow piston\u003c\/li\u003e\n\u003cli\u003eSelf-lubricating seals\u003c\/li\u003e\n\u003cli\u003eSilver powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFOX 2.0 Performance Series\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch Impact extruded aluminum body\u003c\/li\u003e\n\u003cli\u003eInternal floating piston (IFP) monotube design\u003c\/li\u003e\n\u003cli\u003eCNC machined 6061-T6 aluminum mounting ends\u003c\/li\u003e\n\u003cli\u003eMassive 5\/8-inch hard chrome plated heat-treated alloy steel shaft\u003c\/li\u003e\n\u003cli\u003eRace-developed high-flow piston design\u003c\/li\u003e\n\u003cli\u003eApplication-specific valving to maximize performance\u003c\/li\u003e\n\u003cli\u003eLong-lasting clear anodized finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eFor models built after February 9, 1994 due to track bar stud size.\u003c\/li\u003e\n\u003cli\u003eMay require exhaust modification\u003c\/li\u003e\n\u003cli\u003eDual stabilizer may be substituted for single stabilizer that comes in the kit.\u003c\/li\u003e\n\u003cli\u003eThese vehicles were produced with and without a top mounted overload spring. You will need to identify which your vehicle has before ordering.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\n\u003ctable border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASC\u003c\/td\u003e\n\u003ctd\u003eFor models built after February 9 1994 due to track bar stud size.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASC\u003c\/td\u003e\n\u003ctd\u003eMay require exhaust modification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASC\u003c\/td\u003e\n\u003ctd\u003eDual stabilizer may be substituted for single stabilizer that comes in the kit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASC\u003c\/td\u003e\n\u003ctd\u003eThese vehicles were produced with and without a top mounted overload spring. You will need to identify which your vehicle has before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003e94-99 Dodge 3\/4 ton 4.5\/4.5 spring Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003e94-99 Dodge 2500| 4.5-4.5 spring Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eTubular short arms improve strength handling and caster control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHeavy duty control arm brackets maintain proper suspension geometry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFront high strength progressive rate coil springs for a great ride on any terrain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFront track bar relocation bracket to re-position axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eForged drop pitman arm to correct steering angles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFront sway bar correction to maintain handling performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eBDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eImprove the ride and style of your 1994-1999 Dodge RAM 2500 and 3500 4WD truck with this 4.5-inch lift kit from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 35\" tires. BDS engineered new lower control arms that are longer than stock to rotate the axle for proper alignment and built a relocation mounting bracket to flatten out the angle of the upper control arm to maintain your factory handling characteristics.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eUp front the lift kit includes Pro-Ride coil springs all four control arms plus relocation bracket forged drop pitman arm and track bar bracket for steering correction bump stops sway bar drop brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks. In the rear this kit utilizes heavy duty cast steel block and add-a-leaf combo longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003ePro-Ride Coil Springs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eA pair of full-length diesel-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eSteering Correction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eTo optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eSuspension lift kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eSuspension Lift Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"BDS Suspension","offers":[{"title":"Default Title","offer_id":45532517335325,"sku":"BLDV_BDS215H","price":2497.09,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/2771\/7661\/products\/bds_ram_215H_221H_247H_253H.jpg?v=1757437376","url":"https:\/\/www.mytruckpoint.ca\/products\/bds215h-bds-suspension-94-99-dodge-3-4-ton-4-5-4-5-spring-kit","provider":"TruckPoint: Truck Accessories - Car Parts - Canadian Auto Parts","version":"1.0","type":"link"}