Found Better Price?...
We offer price Match plus 10% off the price different
Serving Canadian Since 2015
Couldn't load pickup availability
Specifications:
| Description_ASC | If driveline vibration occurs order either transfer case drop. NOTE: 122606 transfer case drop kit will only replace the OE bracket #52121938AA |
| Description_ASC | Additional front driveline modification may be required. |
| Description_ASC | Exhaust modification will be required for dual rear shock kit 122009. |
| Description_ASC | 2500 Gas models will require modification to the front exhaust crossover pipe on driver side for proper clearance when a transfer case indexing ring kit is installed |
| Description_ASC | If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2"-1-5/8" you will need to add part # BDS082404 to your kit. |
| Description_DES | 2008 Ram 8/5 coilover Long arm with 4in. axle- Diesel engine |
| Description_EXT | 2008 Ram 8-5 coilover Long arm with 4in. axle- Diesel engine |
| Description_FAB | FOX 2.5 Factory series coil-overs offer improved damper performance over stock |
| Description_FAB | Tubular long arms reduce caster change and create more controlled feeling on and off road |
| Description_FAB | Heavy duty control arm brackets maintain proper suspension geometry |
| Description_FAB | Front high strength progressive rate coil springs for a great ride on any terrain |
| Description_FAB | Front track bar relocation bracket to re-position axle |
| Description_FAB | Forged drop pitman arm to correct steering angles |
| Description_FAB | Front sway bar correction to maintain handling performance |
| Description_FAB | Rear FOX performance series IFP gas shocks to improved ride and offroad performance |
| Description_MKT | Maximize the capability of your 2008 Dodge RAM 2500 and 3500 4WD diesel truck with this 8-inch lift kit with long arm and FOX 2.5 Coil-over conversion from BDS Suspension. These kits feature proprietary FOX 2.5 coil-over shocks designed specifically to bolt-on performance for increased travel and the ability to soak up the roughest terrain along with smooth on-road comfort. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 38" tires. |
| Description_MKT | BDS developed a mounting system that bolts directly to the factory coil mounts with only minor trimming/drilling required. This new system also includes weld in reinforcements at the axle for superior strength. BDS built the long lower control arms to reduce caster change through wheel travel which creates a more controlled feeling in the steering wheel. This long arm long arm system retains the factory triangulation of the arms which adds to the stability of the suspension system. |
| Description_MKT | Up front the lift kit includes FOX 2.5 Coil-Over shocks all four control arms plus mounting bracket forged drop pitman arm and track bar bracket for steering correction bump stops and sway bar links. In the rear this kit utilizes heavy duty cast steel blocks longer u-bolts and a matching set of FOX 2.0 Performance shocks. |
| Description_MKT | FOX 2.5 Coil-Overs |
| Description_MKT | FOX 2.5 coil-overs offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box these bolt-on 2.5-inch diameter coil-overs are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. |
| Description_MKT | Long Arm Conversion |
| Description_MKT | Upgrading the standard control arms to a long arm adds strength improves handling and takes offroad articulation to the next level. This upgrade consists of massive 1/4-inch steel frame mounted brackets to install the oversized upper and lower formed long arms. The arms are formed for maximum tire clearance and allow the stock control arm tabs to remain on the vehicle. The upper arms are solid stock while the heavy wall tubular lower arms utilize oversized greaseable polyurethane bushings for superior road vibration isolation. |
| Description_SHO | Suspension lift kit |
| Description_DEF | Suspension Lift Kit |
| Description_ASC | Measure rear axle tube before ordering. Some 4" axle models with dual overloads will require UBT4068. |
| Description_ASC | Rear lift options will not fit dually applications. |
If you have any questions or need assistance, please reach out to us at 800.292.4173 or support@mytruckpoint.ca.
When it comes to your truck, compromise is not an option. At MyTruckPoint, we deliver the quality, speed, and trust that professionals across Canada depend on every day.
A decade of proven reliability serving truck owners, fleets, and businesses nationwide. We’ve built our reputation by delivering consistent quality and dependable service.
Over one hundred thousand successful orders — every one backed by accuracy, speed, and customer satisfaction you can count on.
No knock-offs. No compromises. Only genuine parts from top-tier brands, ensuring performance, safety, and long-term value.
Our parts are selected to handle real-world demands — tough jobs, long hauls, and harsh conditions. Because your truck deserves the best.
Premium quality doesn’t have to mean premium prices. We deliver exceptional value so you get more for every dollar spent.
Downtime costs money. That’s why we process orders quickly and deliver efficiently — so you can get back on the road faster.
Not sure what you need? Our experienced team is here to guide you with honest advice and the right solutions — every time.
We stand behind every order. Your satisfaction isn’t optional — it’s our priority.
MyTruckPoint — Trusted by Thousands. Built for the Road.
Thanks for subscribing!
This email has been registered!

We offer price Match plus 10% off the price different
Serving Canadian Since 2015